Mô tả sản phẩm

SUNX NA2-N12

HÃNG SẢN XUẤT :	SUNX
LOẠI :	SAFETY COMPONENTS, AREA SENSORS

MÔ TẢ CHI TIẾT

SUNX ULTRA-SLIM THRUBEAM SENSORS/AREA SENSOR

PERFECT SENSOR FOR PARTS-PICKING BIN SENSOR

12 TO 24 VDC WITH NPN OUTPUT

SEPARATE INPUT LIGHTS UP JOB INDICATOR

220MM SENSING HEIGHT X 0.2 TO 3M SENSING DISTANCE, 35MM MINIMUM OBJECT DETECTION

2M CONNECTION CABLE

SHIPPING WEIGHT: 0.35 LBS

Item	Specifications
Product Number	NA2-N12
Part Number	NA2-N12
Sensing height	220 mm 8.661 in
Sensing range	5 m 16.404 ft
Beam pitch	20 mm 0.787 in
Sensing object	dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON	0.8 W or less
Power consumption:Emitter:Job indicator OFF	0.7 W or less
Power consumption:Receiver:Job indicator ON	0.8 W or less
Power consumption:Receiver:Job indicator OFF	0.7 W or less
Output	NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less (between output and 0 V) – Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category	DC-12 or DC-13
Output:Output operation	ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protection	Incorporated
Response time	10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter	Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver	Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention function	Incorporated
Test input (emission halt) function	Incorporated
Pollution degree	3 (Industrial environment)
Protection	IP40(IEC)
Ambient temperature	-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance	Incandescent light: 3,000 lx at the light-receiving face
EMC	EN 60947-5-2
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance	500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element	Infrared LED
Material	Enclosure: Heat-resistant ABS Lens cover: Polyester Indicator cover: Acrylic
Cable	0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extension	Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver)	Net weight: 400 g approx. Gross weight: 600 g approx.