Mô tả sản phẩm

ASD-A2-1043-M

DRIVE SPECIFICATION

MODEL				ASD-A2-1043-M
CORRESPONDING SERVO MOTOR				ECMA-K11310 _S(S=22MM) ECMA-L11308_S(S=22MM)
POWER				1000W
POWER	INPUT VOLTAGE			24VDC,+/- 10%
	INPUT CURRENT			0.89A
	INPUT POWER			21.4W
MAIN CIRCUIT POWER				THREE-PHASE 380 ~ 480 VAC, +/- 10%
CONTINUOUS OUTPUT CURRENT				3.52ARMS
COOLING METHOD				FAN COOLING
ENCODER RESOLUTION (SERVO DRIVE RESOLUTION)				INCREMENTAL TYPE: 20-BIT (1280000 P/REV) ;ABSOLUTE TYPE: 17-BIT (1280000 P/REV)
MAIN CIRCUIT CONTROL				SVPWM (SPACE VECTOR PULSE WIDTH MODULATION) CONTROL
CONTROL MODE				AUTO / MANUAL
DYNAMIC BRAKE				BUILT-IN
POSITION CONTROL MODE		MAX. INPUT PULSE FREQUENCY		MAX. 500KPPS / 4MPPS (LINE DRIVER), MAX. 200KPPS (OPEN COLLECTOR)
		PULSE TYPE		PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE
		COMMAND SOURCE		EXTERNAL PULSE TRAIN /INTERNAL PARAMETERS
		SMOOTHING STRATEGY		LOW-PASS AND P-CURVE FILTER
		E-GEAR RATIO		E-GEAR RATIO N/M MULTIPLE N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
		TORQUE LIMIT		PARAMETER SETTINGS
		FEED FORWARD COMPENSATION		PARAMETERS SETTINGS
SPEED CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 K Ω
			TIME CONSTANT	2.2 US
		SPEED CONTROL RANGE		1 : 5000
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS AND S-CURVE FILTER
		TORQUE LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
		BANDWIDTH		MAXIMUM 1 KHZ
		SPEED ACCURACY		0.01% OR LESS AT 0 TO 100% LOAD FLUCTUATION
				0.01% OR LESS AT ±10% POWER FLUCTUATION
				0.01% OR LESS AT 0°C TO 50°C AMBIENT TEMPERATURE FLUCTUATION
TORQUE CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 KΩ
			TIME CONSTANT	2.2 US
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS FILTER
		SPEED LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
ANALOG MONITOR OUTPUT				MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V)
COMMUNICATION INTERFACE				RS-232 / RS-485 / CAN OPEN/USB