Mô tả sản phẩm

ECMA-C10401GS+ASD-A2-0121-F

SPECIFICATIONS OF SERVO DRIVE

MODEL				ASD-A2-0121-F
CORRESPONDING SERVO MOTOR				ECMA-C_0401_S(S=8MM) ECMA-C1040F_S(S=8MM)
POWER				100W
POWER	PHASE / VOLTAGE			THREE-PHASE/SINGLE-PHASE 220 VAC
	PERMISSIBLE VOLTAGE			THREE-PHASE/SINGLE-PHASE 200 ~ 230 VAC, -15% ~ 10%
	CONTINUOUS OUTPUT CURRENT			0.9 ARMS
COOLING METHOD				NATURAL COOLING
ENCODER RESOLUTION (SERVO DRIVE RESOLUTION)				INCREMENTAL TYPE: 20-BIT (1280000 P/REV) ; ABSOLUTE TYPE: 17-BIT (1280000 P/REV)
MAIN CIRCUIT CONTROL				SVPWM (SPACE VECTOR PULSE WIDTH MODULATION) CONTROL
CONTROL MODE				AUTO / MANUAL
DYNAMIC BRAKE				NONE
POSITION CONTROL MODE		MAX. INPUT PULSE FREQUENCY		MAX. 500KPPS / 4MPPS (LINE DRIVER), MAX. 200KPPS (OPEN COLLECTOR)
		PULSE TYPE		PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE
		COMMAND SOURCE		EXTERNAL PULSE / REGISTER
		SMOOTHING STRATEGY		LOW-PASS AND P-CURVE FILTER
		E-GEAR RATIO		E-GEAR RATIO N/M MULTIPLE N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
		TORQUE LIMIT		PARAMETER SETTINGS
		FEED FORWARD COMPENSATION		PARAMETERS SETTINGS
SPEED CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 K Ω
			TIME CONSTANT	2.2 US
		SPEED CONTROL RANGE		1 : 5000
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS AND S-CURVE FILTER
		TORQUE LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
		BANDWIDTH		MAXIMUM 1 KHZ
		SPEED ACCURACY		0.01% OR LESS AT 0 TO 100% LOAD FLUCTUATION
				0.01% OR LESS AT ±10% POWER FLUCTUATION
				0.01% OR LESS AT 0°C TO 50°C AMBIENT TEMPERATURE FLUCTUATION
TORQUE CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 KΩ
			TIME CONSTANT	2.2 US
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS FILTER
		SPEED LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
ANALOG MONITOR OUTPUT				MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V)
COMMUNICATION INTERFACE				RS-232 / RS-485 / CAN OPEN/USB

MODEL	ECMA-C10401GS
PRODUCT NAME	ELECTRONIC COMMUTATION MOTOR
SERVO TYPE	AC SERVO
NAME OF THE SERIES	A2
RATED VOLTAGE(V)	220
ENCODER TYPE	INCREMENTAL, 20-BIT
MOTOR FRAME SIZE(MM)	40
TYPE OF SHAFT DIAMETER AND OIL SEAL	KEYWAY, W/O BRAKE WITH OIL SEAL
STANDARD SHAFT DIAMETER	S=8MM
RATED POWER OUTPUT(W)	100
RATED TORQUE (N-M)	0.32
MAX. TORQUE (N-M)	0.96
RATED SPEED (RPM)	3000
MAX. SPEED (RPM)	5000
RATED CURRENT (A)	0.90
MAX. INSTANTANEOUS CURRENT (A)	2.70
POWER RATING (KW/S)	27.7
ROTOR INERTIA (× 10-4KG.M2)	0.037
MECHANICAL CONSTANT (MS)	0.75
TORQUE CONSTANT-KT (N-M/A)	0.36
VOLTAGE CONSTANT-KE (MV/(R/MIN))	13.6
ARMATURE RESISTANCE (OHM)	9.30
ARMATURE INDUCTANCE (MH)	24.0
ELECTRIC CONSTANT (MS)	2.58
INSULATION CLASS	CLASS A (UL), CLASS B (CE)
INSULATION RESISTANCE	> 100 M OHM , DC 500 V
INSULATION STRENGTH	1.8K VAC, 1 SEC
WEIGHT (KG) (WITHOUT BRAKE)	0.5
RADIAL MAX. LOADING (N)	78.4
AXIAL MAX. LOADING (N)	39.2
POWER RATING (KW/S) (WITH BRAKE)	25.6
ROTOR INERTIA (× 10-4KG.M2) (WITH BRAKE)	0.04
MECHANICAL CONSTANT (MS) (WITH BRAKE)	0.81
VIBRATION GRADE (ΜM)	15
OPERATING TEMPERATURE(DEGREE CENTIGRADE)	0~40
STORAGE TEMPERATURE(DEGREE CENTIGRADE)	-10~80
OPERATING HUMIDITY	20~90% RH NON-CONDENSATE
STORAGE HUMIDITY	20~90% RH NON-CONDENSATE
VIBRATION CAPACITY(G)	2.5
IP RATING	IP65
APPROVALS	CE UL