Mô tả sản phẩm

ECMA-G11306SS+ASD-A2-0721-M

MODEL				ASD-A2-0721-M
CORRESPONDING SERVO MOTOR				ECMA-F11305_S(S=22MM) ECMA-C_0807_S(S=19MM) ECMA-C_0807_H(HIGH INERTIA) ECMA-C_0907_S(S=16MM) ECMA-G_1306_S(S=22MM)
POWER				750W
POWER	PHASE / VOLTAGE			THREE-PHASE/SINGLE-PHASE 220 VAC
	PERMISSIBLE VOLTAGE			THREE-PHASE/SINGLE-PHASE 200 ~ 230 VAC, -15% ~ 10%
	CONTINUOUS OUTPUT CURRENT			5.1ARMS
COOLING METHOD				FAN COOLING
ENCODER RESOLUTION (SERVO DRIVE RESOLUTION)				INCREMENTAL TYPE: 20-BIT (1280000 P/REV) ; ABSOLUTE TYPE: 17-BIT (1280000 P/REV)
MAIN CIRCUIT CONTROL				SVPWM (SPACE VECTOR PULSE WIDTH MODULATION) CONTROL
CONTROL MODE				AUTO / MANUAL
DYNAMIC BRAKE				BUILT-IN
POSITION CONTROL MODE		MAX. INPUT PULSE FREQUENCY		MAX. 500KPPS / 4MPPS (LINE DRIVER), MAX. 200KPPS (OPEN COLLECTOR)
		PULSE TYPE		PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE
		COMMAND SOURCE		EXTERNAL PULSE / REGISTER
		SMOOTHING STRATEGY		LOW-PASS AND P-CURVE FILTER
		E-GEAR RATIO		E-GEAR RATIO N/M MULTIPLE N: 1~32767, M: 1:32767 (1/50 < N/M < 25600)
		TORQUE LIMIT		PARAMETER SETTINGS
		FEED FORWARD COMPENSATION		PARAMETERS SETTINGS
SPEED CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 K Ω
			TIME CONSTANT	2.2 US
		SPEED CONTROL RANGE		1 : 5000
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS AND S-CURVE FILTER
		TORQUE LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
		BANDWIDTH		MAXIMUM 1 KHZ
		SPEED ACCURACY		0.01% OR LESS AT 0 TO 100% LOAD FLUCTUATION
				0.01% OR LESS AT ±10% POWER FLUCTUATION
				0.01% OR LESS AT 0°C TO 50°C AMBIENT TEMPERATURE FLUCTUATION
TORQUE CONTROL MODE		ANALOG COMMAND INPUT	VOLTAGE RANGE	0 ~ ±10 VDC
			INPUT RESISTANCE	10 KΩ
			TIME CONSTANT	2.2 US
		COMMAND SOURCE		EXTERNAL ANALOG COMMAND / REGISTER
		SMOOTHING STRATEGY		LOW-PASS FILTER
		SPEED LIMIT		VIA PARAMETER SETTING OR ANALOG INPUT
ANALOG MONITOR OUTPUT				MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V)
COMMUNICATION INTERFACE				RS-232 / RS-485 / CAN OPEN/USB

ASD-A2-0721 ASD-A2-1021 ASD-A2-1521750W-1.5KW

MODEL	ECMA-G11306SS
PRODUCT NAME	ELECTRONIC COMMUTATION MOTOR
SERVO TYPE	AC SERVO
NAME OF THE SERIES	A2
RATED VOLTAGE	220V
ENCODER TYPE	INCREMENTAL TYPE, 20-BIT
MOTOR FRAME SIZE	130 MM
TYPE OF SHAFT DIAMETER AND OIL SEAL	KEYWAY (WITH FIXED SCREW HOLES), WITH BRAKE, WITH OIL SEAL
STANDARD SHAFT DIAMETER	S=22MM
RATED POWER OUTPUT	600W
RATED TORQUE (N-M)	5.73
MAX. TORQUE (N-M)	17.19
RATED SPEED	1000 RPM
MAX. SPEED	2000 RPM
RATED CURRENT (A)	4.8
MAX. INSTANTANEOUS CURRENT (A)	14.4
ROTOR INERTIA (× 10-4KG.M2)	8.41
MECHANICAL CONSTANT (MS)	1.40
TORQUE CONSTANT-KT (N-M/A)	1.19
VOLTAGE CONSTANT-KE (MV/(R/MIN))	43.8
ARMATURE RESISTANCE (OHM)	0.82
ARMATURE INDUCTANCE (MH)	11.12
ELECTRIC CONSTANT (MS)	13.50
INSULATION CLASS	CLASS A (UL), CLASS B (CE)
INSULATION RESISTANCE	> 100 M OHM, DC 500 V
INSULATION STRENGTH	1.8K VAC, 1 SEC
WEIGHT (KG) (WITH BRAKE)	8.4KG
BRAKE HOLDING TORQUE NT-M(MIN)]	10.0
BRAKE POWER CONSUMPTION (AT 20 °C) [W]	19.0
BRAKE RELEASE TIME [MS (MAX)]	10
BRAKE PULL-IN TIME [MS (MAX)]	70
RADIAL MAX. LOADING (N)	490
AXIAL MAX. LOADING (N)	98
VIBRATION GRADE (ΜM)	15
OPERATING TEMPERATURE	0~40 DEGREE CENTIGRADE
STORAGE TEMPERATURE	-10~80 DEGREE CENTIGRADE
OPERATING HUMIDITY	20~90% RH NON-CONDENSATE
STORAGE HUMIDITY	20~90% RH NON-CONDENSATE
VIBRATION CAPACITY	2.5G
IP RATING	IP65
APPROVALS	CE UL