Mô tả sản phẩm
SENSOR AP-C33P
| TYPE | POSITIVE PRESSURE | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| MODEL | AP-C33P | |||||||||
| RATED PRESSURE RANGE | 0 ~ +1.000 MPA | |||||||||
| WITHSTANDING PRESSURE | 1.5MPA | |||||||||
| APPLICABLE FLUID | AIR AND NON-CORROSIVE GAS | |||||||||
| KIND OF PRESSURE | GAUGE PRESSURE | |||||||||
| RATING | POWER-SUPPLY VOLTAGE | RIPPLE (PP) 10% OR LESS DC12-24V ± 10% | ||||||||
| POWER CONSUMPTION |
|
|||||||||
| DISPLAY TYPE | 7-SEGMENT LED 2 COLOR 3 +1 / 2 DIGIT (CHARACTER HEIGHT 11MM) DISPLAY CYCLE: 10 TIMES / SECOND | |||||||||
| SET / DISPLAY RANGE ※ 1 | -15 ~ +110% OF FS | |||||||||
| OPERATION INDICATOR | (CORRESPONDING TO THE CONTROL OUTPUT 1 / OUTPUT CONTROL 2) RED LED × 2 | |||||||||
| RESOLUTION | STANDARD MODE | 0.001MPA | ||||||||
| FOCUS MODE | 0.1KPA | |||||||||
| HYSTERESIS (HYSTERESIS) | STANDARD: 0.5% OF FS / FOCUS MODE: 0.2% OF FS / HYSTERESIS VARIABLE MODE (F-2) AT THE TIME: VARIABLE |
|||||||||
| DISPLAY TEMPERATURE CHARACTERISTICS | ± OF FS LESS THAN 1% | |||||||||
| RESPONSE (ANTI-CHATTERING FUNCTION) | 2.5/5/100/500MS SELECTION | |||||||||
| ZERO SHIFT INPUT | (NO CONTACT) NO-VOLTAGE INPUT (SWITCHABLE ANALOG OUTPUT) 2MS OR MORE INPUT TIME |
|||||||||
| CONTROL OUTPUT | PNP OPEN COLLECTOR UP TO 100MA (30V OR LESS) RESIDUAL VOLTAGE BELOW 1V, NO / NC CHANGEABLE |
|||||||||
| ANALOG OUTPUT | (SWITCHING AND ZERO SHIFT INPUT) 1-5V OUTPUT IMPEDANCE 1KΩ OR LESS | |||||||||
| ENVIRONMENT RESISTANCE | AMBIENT TEMPERATURE | THE (NON-FREEZING) 0 ~ +50 ℃ | ||||||||
| AMBIENT HUMIDITY | (NON-CONDENSING) 35 ~ 85% RH | |||||||||
| VIBRATION RESISTANCE | 10 ~ 55HZ DOUBLE AMPLITUDE 1.5MM X, Y, 2 HOURS AND Z DIRECTIONS | |||||||||
| PRESSURE PORT | ROTARY RC (PT) 1/8 180 DEGREE | |||||||||
| MATERIAL | FRONT CASE: POLYSULFONE, REAR CASE: PBT, FRONT SEAT: POLYCARBONATE, PRESSURE PORT: ZINC DIE-CASTING |
|||||||||
| MASS | (WITHOUT CABLE) ABOUT 30G / ABOUT 85G (WITH 2M CABLE) | |||||||||
| ACCESSORIES | (2M, CONNECTOR TYPE), POWER CORD UNIT SEAL | |||||||||
CÔNG TY CỔ PHẦN SẢN XUẤT VÀ THƯƠNG MẠI PHẠM DƯƠNG
TRỤ SỞ: SN27, HẺM 201/12/20 ĐƯỜNG PHÚC LỢI, TỔ 6, P. PHÚC LỢI, Q. LONG BIÊN, HNOI.
MST: 0105176667
VPGD: SN 16/469, ĐƯỜNG NGUYỄN TRÃI, QUẬN THANH XUÂN, TP. HÀ NỘI.
TEL: 0485.854.668 FAX: 0462.852.262
HOTLINE: 0974 596 569 – 0945 627 188 – 0976 844 195 – 0968 627 188
EMAIL: INFO@PHAMDUONGJSC.COM.VN – PHAMDUONGJSC@GMAIL.COM
WEBSITE: HTTP://PHAMDUONGJSC.COM.VN/ HTTP://PHAMDUONGJSC.COM/
WEBSITE: HTTP://SUNXVIETNAM.COM/ HTTP://TUDONGHOA365.COM/
WEBSITE: HTTP://PLC-HMI-SENSOR.COM.
Đánh giá
Chưa có đánh giá nào.