Mô tả sản phẩm
SENSOR AP-C33W
| TYPE | POSITIVE PRESSURE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MODEL | AP-C33W | ||||||||||
| RATED PRESSURE RANGE | MPA | 0 TO 1.000 | |||||||||
| KGF / CM 2 | 0 TO 10.20 | ||||||||||
| MMHG | – | ||||||||||
| INHG | – | ||||||||||
| PSI | 0 TO 145.0 | ||||||||||
| BAR | 0 TO 10.00 | ||||||||||
| WITHSTANDING PRESSURE | 1.5MPA | ||||||||||
| APPLICABLE FLUID | AIR AND NON-CORROSIVE GAS | ||||||||||
| KIND OF PRESSURE | GAUGE PRESSURE | ||||||||||
| RATING | POWER-SUPPLY VOLTAGE | RIPPLE (PP) 10% OR LESS DC12-24V ± 10% | |||||||||
| POWER CONSUMPTION |
|
||||||||||
| DISPLAY TYPE | 7-SEGMENT LED 2 COLOR 3 +1 / 2 DIGIT (CHARACTER HEIGHT 11MM) DISPLAY CYCLE: 10 TIMES / SECOND | ||||||||||
| SET / DISPLAY RANGE ※ 1 | -15 ~ +110% OF FS | ||||||||||
| OPERATION INDICATOR | (CORRESPONDING TO THE CONTROL OUTPUT 1 / OUTPUT CONTROL 2) RED LED × 2 | ||||||||||
| RESOLUTION | STANDARD MODE | MPA | 0.001 | ||||||||
| KGF / CM 2 | 0.01 | ||||||||||
| MMHG | – | ||||||||||
| INHG | – | ||||||||||
| PSI | 0.2 | ||||||||||
| BAR | 0.01 | ||||||||||
| FOCUS MODE | KPA | 0.1 | |||||||||
| KGF / CM 2 | 0.001 | ||||||||||
| MMHG | – | ||||||||||
| INHG | – | ||||||||||
| PSI | 0.02 | ||||||||||
| BAR | 0.001 | ||||||||||
| REPEAT ACCURACY | ± 0.2% OF FS | ||||||||||
| HYSTERESIS (HYSTERESIS) | STANDARD: 0.5% OF FS / FOCUS MODE: 0.2% OF FS / HYSTERESIS VARIABLE MODE (F-2) AT THE TIME: VARIABLE |
||||||||||
| DISPLAY TEMPERATURE CHARACTERISTICS | ± OF FS LESS THAN 1% | ||||||||||
| RESPONSE (ANTI-CHATTERING FUNCTION) | 2.5/5/100/500MS SELECTION | ||||||||||
| ZERO SHIFT INPUT | (SWITCHING AND ANALOG OUTPUT) 2MS OR MORE INPUT TIME | ||||||||||
| CONTROL OUTPUT | NPN OPEN COLLECTOR UP TO 100MA (40V OR LESS) RESIDUAL VOLTAGE BELOW 1V, 2 OUTPUT (NO / NC CHANGEABLE) |
||||||||||
| ANALOG OUTPUT | (SWITCHING AND ZERO SHIFT INPUT) 1-5V OUTPUT IMPEDANCE 1KΩ OR LESS | ||||||||||
| ENVIRONMENT RESISTANCE | AMBIENT TEMPERATURE | THE (NON-FREEZING) 0 ~ +50 ℃ | |||||||||
| AMBIENT HUMIDITY | (NON-CONDENSING) 35 ~ 85% RH | ||||||||||
| VIBRATION RESISTANCE | 10 ~ 55HZ DOUBLE AMPLITUDE 1.5MM X, Y, 2 HOURS AND Z DIRECTIONS | ||||||||||
| PRESSURE PORT | ROTARY RC (PT) 1/8 180 DEGREE | ||||||||||
| MATERIAL | FRONT CASE: POLYSULFONE, REAR CASE: PBT, FRONT SEAT: POLYCARBONATE, PRESSURE PORT: ZINC DIE-CASTING |
||||||||||
| MASS | (WITHOUT CABLE) ABOUT 30G / ABOUT 85G (WITH 2M CABLE) | ||||||||||
| ACCESSORIES | (2M, CONNECTOR TYPE), POWER CORD UNIT SEAL | ||||||||||
CÔNG TY CỔ PHẦN SẢN XUẤT VÀ THƯƠNG MẠI PHẠM DƯƠNG
TRỤ SỞ: SN27, HẺM 201/12/20 ĐƯỜNG PHÚC LỢI, TỔ 6, P. PHÚC LỢI, Q. LONG BIÊN, HNOI.
MST: 0105176667
VPGD: SN 16/469, ĐƯỜNG NGUYỄN TRÃI, QUẬN THANH XUÂN, TP. HÀ NỘI.
TEL: 0485.854.668 FAX: 0462.852.262
HOTLINE: 0974 596 569 – 0945 627 188 – 0976 844 195 – 0968 627 188
EMAIL: INFO@PHAMDUONGJSC.COM.VN – PHAMDUONGJSC@GMAIL.COM
WEBSITE: HTTP://PHAMDUONGJSC.COM.VN/ HTTP://PHAMDUONGJSC.COM/
WEBSITE: HTTP://SUNXVIETNAM.COM/ HTTP://TUDONGHOA365.COM/
WEBSITE: HTTP://PLC-HMI-SENSOR.COM.
Đánh giá
Chưa có đánh giá nào.