Kinco 2CM560

Kinco 2CM560

Giá:

Mô tả sản phẩm

Kinco 2CM560

Thông số kỹ thuật Kinco 2CM560

Function

The maximum supply voltage can reach 50VDC;
The bipolar constant current drive mode is taken, with a maximum drive current up to 5.6A per phase, which can drive any 42 series two-phase bipolar hybrid stepper motors with a current less than 5.6A;
The drive output phase current of a motor can be regulated through the DIP switch, to match motors of different specifications;
A DIP switch is used to set the automatic half current function of motors in statically locked status, which can greatly reduce heat dissipation of the motors;
A dedicated control chip is used, with a maximum of 256/200 subdivisions. The subdivision function can be set by the DIP switch, to ensure the best operation stability;
Supporting offline function so that the output current of a motor can be cut off if necessary;
Optical coupling devices are used for the isolation of the input circuit of the control signals to reduce interference of external noises.

Technical Specifications

Model 2CM560
Supply voltage 24-50VDC
Output phase current 0.2 ~ 5.6A
Control signal Voltage:5V;Current:6 ~ 16mA;(when the voltage is 24V,there must be a resistance of 2K)
Cooling method Natural air cooling
Operating environment Avoid the environment with a great amount of metallic powder, oil mist, or erosive gases
Operating temperature -10℃ ~ +45℃
Operating humidity <85% (non-condensing or water drops)

Các model cùng loại Kinco 2CM560

Model Driver Kinco

Model Power Supply Maximum Output Phase Current Notes
2M412 12–40VDC 1.2A 2-phase subdivision
2M420 24–40VDC 2.5A 2-phase subdivision
2M530 24–48VDC 3.5A 2-phase subdivision
2M860 24–70VDC 6A 2-phase subdivision
3M458 24–40VDC 5.8A 3-phase subdivision
2M880N 24–70VDC 8A N series 2-phase subdivision
2M1180N 110VAC 8A N series 2-phase subdivision
2M2280N 220VAC 8A N series 2-phase subdivision
3M2280N 220VAC 8A N series 3-phase subdivision
2CM525 24–50VDC 2.5A 2-phase subdivision
2CM545 24–50VDC 4.5A 2-phase subdivision
2CM560 24–50VDC 5.6A 2-phase subdivision
2CM860 24–70VDC 8.6A 2-phase subdivision
2CM880 24–70VDC 8A 2-phase subdivision
3CM880 24–70VDC 8A 3-phase subdivision
CM880A 24–70VDC 8A 2-phase or 3-phase subdivision

Thông tin chi tiết sản phẩm Kinco 2CM560 xin vui lòng liên hệ

CÔNG TY CỔ PHẦN SẢN XUẤT VÀ THƯƠNG MẠI PHẠM DƯƠNG
TRỤ SỞ: SN27, HẺM 201/12/20 ĐƯỜNG PHÚC LỢI, TỔ 6, P. PHÚC LỢI, Q. LONG BIÊN, HNOI.
MST: 0105176667
VPGD: SN 16/469, ĐƯỜNG NGUYỄN TRÃI, QUẬN THANH XUÂN, TP. HÀ NỘI.
TEL: 0485.854.668 FAX: 0462.852.262
HOTLINE: 0974 596 569 – 0945 627 188 – 0976 844 195 – 0968 627 188
EMAIL: INFO@PHAMDUONGJSC.COM.VN – PHAMDUONGJSC@GMAIL.COM
WEBSITE: HTTP://PHAMDUONGJSC.COM.VN/ HTTP://PHAMDUONGJSC.COM/
WEBSITE: HTTP://SUNXVIETNAM.COM/ HTTP://TUDONGHOA365.COM/
WEBSITE: HTTP://PLC-HMI-SENSOR.COM

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Kinco 2CM560”

Thư điện tử của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *